Ruthanne designed these plans for making your own warping board.
This board will hold a 16 yard warp.
(Eliminate the posts with the X and it will hold a 14 yard warp)
. 4 – 1×4 red oak boards – 4 ft. long
4 – 1″ hardwood dowels – 3 ft long
8 – 1 1/4″ wood screws
wood glue
polyurethane varnish – Satin finish Frame
Oak Boards
2 @ 40 1/4″
2@ 26″
Posts
Hardwood Dowels
4 @ 6 3/4″ (marked A)
17@ 6″ (or 15 @ 6″)
Holes for the posts are drilled through the frame posts
(We had to grind down a 1″ spade bit to fit the dowels)
Boards are overlapped with the short boards in front
Glued and screwed together from the back
with countersunk wood screws
Posts are beveled on one end
and glued into place
Everything is sanded and given one cote of Satin Polyurethane varnish.
Warping Board Plans
Handweaving Books
A Handweaver’s Pattern Book
A collection of 377 patterns for four-harness weaving, organized in groups of similar designs. This is one of the first weaving books I bought and it is still one of my favourites.
UK: Handweavers Pattern Book
The Weaver’s Book: Fundamentals of Handweaving
UK: Fundamentals of Handweaving
Weaving Looms – EBay Watch
LITTLE QUICK WEAVER"C" MODEL RIGID HEDDLE LOOM 15 INCH WEAVING WIDTH
Kumihimo 10 ½ " Square Table for Flat Braids 18” High – Hard Maple Complete Set
newcomb 4 harness 6 treadle art FLOOR LOOM lace rug weaving loom REDUCED PRICE
Crank Leclerc Weaving Loom for Artisat & Compact
